Table of Contents
Advertisement
SAFETY 3
WARNING
Vibration Exposure Limits
Exposure limits are calculated as a combination of the vibration level (magnitude) of the tool and the Daily
Exposure Time (Trigger Time). e.g. A product with 5m/s² vibration can be used up to 2 hours/day
to reach the EAV and up to 8 hours/day to reach the ELV.
Exposure Action Value (EAV) - Daily vibration exposure A(8) = 2.5m/s²
Where daily vibration exposure A(8) is below 2.5m/s² the risk is relatively low and no
action need be taken.
Exposure Limit Value (ELV) - Daily Vibration Exposure A(8) = 5.0m/s²
If several tools are use the exposure values must be combined:
Total exposure is then the combined value of the activities.
WARNING
Never mow if there is a risk of lightning or you hear thunder. If you are in the middle of mowing, stop in a safe
place, turn off the engine and go inside a building.
CAUTION
When you do any welding on the machine, the battery, controller and display must be disconnected before you
start. You must not open the controller. If the controller is opened, this can void all of the warranties and can
cause the failure of the machine.
CAUTION
Personal Protective Equipment (PPE), for example safety glasses, safety footwear, work gloves
and ear protection must be used after the owner/user completes a site specific risk assessment of the
mower to prevent injury.
en-15
Advertisement
Table of Contents
