Settings; Measurement Units; Pin - Ransomes HR380 Manual

6.5

SETTINGS __________________________________________________________

Within the settings Menu you will find the three options:

• Measurement Units

• Pin

• Brightness
6.5.1 MEASUREMENT UNITS_______________________________________________
Buttons 2 & 3 move the arrow up and down the list, Button 4 selects
parameter to be altered, then Button 2 & 3 scroll between the unit types.
When amended as necessary Button 1 then saves the setting.
6.5.2 PIN________________________________________________________________
Enter Pin
1 0 0 1
_ _ _ _
This screen gives access to the following parameters and machine functions that can be altered:
• Cross Cut
• Traction Boost
• Inclinometer
• Set Default Parameters
• Change PIN
The default owner's Pin is 1001, however Ransomes Jacobsen recommend this is changed.
Enter Pin Enter Pin
CONTROLS 6
Settings Menu
Measurement Units
PIN
Brightness
Measurement Units
Speed Km/h
Pressure kPa
Volume Litre
Temperature °C
Fuel Rate L/h
PIN Menu
Cross Cut
Traction Boost
Inclinometer
Set Default Parameters
Change PIN
en-43