Table of Contents
Advertisement
4 SPECIFICATIONS
4.7
ROTARY DECK SPECIFICATION ________________________________________
Construction
Blade Length
Number of Blades
Blade Tip Speed
Width of Cut
Height of Cut
Height of Cut Adjustment Front
Height of Cut Adjustment Rear
Anti Scalp Roll
Transmission
4.8
CUTTING PERFORMANCE_____________________________________________
152cm Deck:
2.46 hectares/hr. at 18kph (6.07 Acres/hr at 11mph)
1.64 hectares/hr. at 12kph (4.05 Acres/hr at 7.5mph)
183cm Deck:
2.96 hectares/hr. at 18kph (7.31 Acres/hr at 11mph)
1.98 hectares/hr. at 12kph (4.88 Acres/hr at 7.5mph)
160cm Flail:
1.73 hectares/hr. at 12kph (4.27Acres/hr at 11mph)
10% allowance is included for normal overlaps and turning at the end of each cut.
4.9
FLAIL UNIT SPECIFICATION ___________________________________________
Description Front Unit
Number of Blades (Front Unit)
Cut Adjustment Front
Cut Adjustment Rear
Transmission
Lowest Height of Cut
Highest Height of Cut
en-22
152cm Deck
Heavy duty welded pressed steel construction
533mm
4692m/min (2800±100rpm)
1524mm
Castor wheels with spacers.
Multi-hole plates and pins.
Four antiscalp rollers on front of deck and two antiscalp
By individual hydraulic motor to each
160cm (63 in.) outfront flail with 30.5cm working diameter, carbide
flails and internal shredding bar.
Toolless, adjustable puncture proof castor wheels.
Heavy duty rear roller with height adjustment.
Dedicated cutter pumps to hydraulic motors with dual V
30mm
80mm
183cm Deck
3
5017m/min (2515±100rpm)
1828mm
25mm - 115mm
rollers on rear of deck.
cutter blade.
28
belt final drive.
635mm
13/16In
3 1/8In
Advertisement
Table of Contents
