Table of Contents
Advertisement
6.6.19
MCU / DISPLAY COMMUNICATION FAULT ___________________________
When this screen is shown, there is a communication fault with the
machine controller (MCU) and/or display. Stop the engine as soon as
possible and contact your local Ransomes Jacobsen Dealer.
6.7
IMPLEMENT LIFT / LOWER SWITCH _____________________________________
To lower the lift arms move the switch lever forward.
To raise the lift arms move the switch lever rearwards
6.8
TRACTION BOOST / WEIGHT TRANSFER SWITCH _________________________
The switch is silver and will transfer weight hydraulically between the
drive wheels and the cutting implement.
It is possible to adjust the amount of weight transfer manually on the
lift valve.
NOTE: Traction Boost can be set to Momentary or Maintained via the
screen. See section 6.5.4
CONTROLS 6
101010
1/2
en-51
Advertisement
Table of Contents
