Time Until Service; Vehicle Diagnostics; I/O Diagnostics - Ransomes HR380 Manual

6 CONTROLS

6.4.1 TIME UNTIL SERVICE ________________________________________________

This screen gives the number of engine hours until the next service
inspection is required.
To reset the service interval press & hold Button 2, 3 & 4 until the figure
changes. Note: this should only be done once the required service has
been completed.

6.4.2 VEHICLE DIAGNOSTICS ______________________________________________

These screens give access to various machine parameters. Buttons 2 &
3 can be used to scroll between the pages, Button 1 returns to the
Service Menu.
Engine Speed Engine Throttle Postion
0
R.P.M.
Pedal A Position Pedal B Position
0.0V 0%
Volt - %

6.4.3 I/O DIAGNOSTICS ___________________________________________________

These screens give access to various controller input and output Pin
functions and their state to be used for diagnostic trouble shooting.
Buttons 2 & 3 can be used to scroll between the pages, Button 1
returns to the Service Menu.
en-36
Cutter Hours
0.0V 0%
Volt - %
Engine Coolant Temperature
0.0V 0%
Volt - %
Fuel Level
0 0
R.P.M. %
Battery Voltage
-40 12.0
°C Volt
Time Until Service
50
Hours
Software Versions
Controller Software Version:
00000000.00.00
HMI Software Version:
00000000.00.00
Engine Total Fuel Used Engine Fuel Rate
0 0.0
{}
Litre I/h
DPF Soot Engine Torque
0 -125
% %