I/O Diagnostics; Settings; Measurement Units - Ransomes MT383 Safety, Operation & Maintenance Manual/Parts List

6 CONTROLS
Engine Speed Engine Throttle Postion
0
R.P.M.
Pedal A Position Pedal B Position
0.0V 0%
Volt - %

6.4.3 I/O DIAGNOSTICS ___________________________________________________

These screens give access to various controller input and output Pin
functions and their state to be used for diagnostic trouble shooting.
Buttons 2 & 3 can be used to scroll between the pages, Button 1
returns to the Service Menu.
6.5

SETTINGS __________________________________________________________

Within the settings Menu you will find the three options:

• Measurement Units

• Pin
• Brightness
6.5.1 MEASUREMENT UNITS_______________________________________________
Buttons 2 & 3 move the arrow up and down the list, Button 4 selects
parameter to be altered, then Button 2 & 3 scroll between the unit
types. When amended as necessary Button 1 then saves the setting.
en-38
Cutter Hours
0.0V 0%
Volt - %
Engine Coolant Temperature
0.0V 0%
Volt - %
Fuel Level
0 0
R.P.M. %
Battery Voltage
12.0
-40
°C Volt
Engine Total Fuel Used Engine Fuel Rate
0 0.0
{}
Litre I/h
DPF Soot Engine Torque
-125
0
% %
Settings Menu
Measurement Units
PIN
Brightness
Measurement Units
Speed Km/h
Pressure kPa
Volume Litre
Temperature °C
Fuel Rate L/h