Table of Contents
Advertisement
6.4.3 I/O DIAGNOSTICS ___________________________________________________
These screens give access to various controller input and output Pin
functions and their state to be used for diagnostic trouble shooting.
Buttons 2 & 3 can be used to scroll between the pages, Button 1
returns to the Service Menu. (See Following Pages for I/0 screens).
6.5
SETTINGS __________________________________________________________
Within the settings Menu you will find the three options:
• Measurement Units
• Pin
• Brightness
6.5.1 MEASUREMENT UNITS_______________________________________________
Buttons 2 & 3 move the arrow up and down the list, Button 4 selects
parameter to be altered, then Button 2 & 3 scroll between the unit types.
When amended as necessary Button 1 then saves the setting.
CONTROLS 6
Settings Menu
Measurement Units
PIN
Brightness
Measurement Units
Speed
Km/h
Pressure
kPa
Volume
Litre
Temperature
°C
Fuel Rate
L/h
en-39
Advertisement
Table of Contents
