Engine Specification; Machine Specification - Ransomes Mastiff 91 Safety, Operation & Maintenance Manual

4 SPECIFICATION

4.1 ENGINE SPECIFICATION

TYPE: Briggs & Stratton 6.5KW @ 1800
RPM camshaft speed, single
cylinder, 4stroke petrol (gasoline)
engine,
12 volt electric start and recoil
start
Model:
Maximum Speed:
Camshaft rotation
Idle Speed:
Camshaft rotation
Oil Sump Capacity:
Fuel:
Fuel Tank Capacity:

4.2 MACHINE SPECIFICATION

Chassis: Pressed steel welded fabrication.
Transmission: Gearbox with half speed reverse
to heavy duty roller chains to
Landroll and cuttingcylinder.
Clutches: Main centrifugal clutch.
Separate Landroll clutch.
Separate cylinder clutch.
Front roll: One piece steel roll runningon
ball bearings.
Landroll: 3 piece cast iron with machine
cut gear differentialrunning in oil
bath, and expanding shoe brake.
Cutting cylinder: All welded 6 or 9 knife, cylinder
running on ball bearings.
SAFETY, OPERATORS & MAINTENANCE MANUAL
296cc, with
Vanguard 185467
3000 RPM +/- 50 rpm
1500 RPM (No load)
1500RPM +/- 50 rpm
750 RPM
1.0 litres
Lead free petrol
7.9 litres
Cutting ratio: 65 or 100 cuts / metre
Height of cut: 13- 35mm
Handles: Tubular steel adjustable at top.
Grassbox: Large capacity fibreglass tip-over
Cutting width: 91cm
4.3 DIMENSIONS
Width of cut: 0.91 metres
Overall width: 1.12 metres
Overall height: 1.27 metres
Overall length: 2.16 metres
Overall weight of
machine: 350Kg
GB-9