Henny Penny CFE-415 Operator's Manual page 76

5-5
DIAGNOSTIC MODE
DETAILS
(CONT.)
March 2015
The number of Beeped 'DONE' Too Long Cycles for this batch of short-
ening is reported next. Note that this value does not yet include the cook
cycles from today.
"D8: BEFORE TODAY "
"D8: 7% OF LOADS"
"D8: BEEPED 'DONE'"
"D8: TOO LONG"
"D8: ON THIS OIL"
(Press ▼)
Finally, the controller identifies percentage of Beeped 'DONE' Too Long
Cycles for the previous batch of shortening:
"D8: LAST OIL"
"D8: 6% OF LOADS"
"D8: BEEPED 'DONE"
"D8: TOO LONG"
D 9: Irregular Loading Report
For most Cook Cycles, the controller determines when the product was
placed into the shortening. This report identifies the percentage of cycles
for which this determination was not successful.
This "drop detection" detects most loads, but can fail for several reasons.
Anytime the detection routine fails to find the true drop point, the con-
troller logs an "irregular loading" count.
Examples of failed "drop detection" might be: the Operator takes too
long to load the product to the time he presses the start button, or the
Operator cooks a very light product load, one or two filets, for example.
In these instances, no drop point will be found and that Cook Cycle
counts as an Irregular Loading Cycle. Only products that have more than
5% of loads with missed detection's are reported.
72
Model CFE-415, 427