Henny Penny CFE-415 Operator's Manual page 32

3-10
DAILY FILTERING
(CONT.)
Figure 3
Figure 4
March 2015
Do not use steel wool, other abrasive cleaners or cleaners/ sanitizer
containing chlorine, bromine, iodine or ammonia chemicals, as these will
deteriorate the stainless steel material and shorten the life of the unit.
Do not use a water jet (pressure sprayer) to clean the unit, or component
damage could result.
Once the vat is clean and the display shows "SCRUB VAT COM-
7.
PLETE?" "YES NO".
Press button and the display shows "WASH VAT" "YES NO".
Press √ button, display shows "WASHING" and oil circulates
8.
through vat for several minutes. When wash cycle is complete, dis-
play shows "WASH AGAIN?" "YES NO".
Press button if another wash is needed, otherwise press
9.
and the display shows "CLOSE DRAIN". Push-in on drain knob to
close drain (Figure 3), the display shows "RINSING" and vat fills
with oil.
Once the vat is filled, "OPEN DRAIN" shows in display. Pull-out on
10.
drain knob to open the drain (Figure 4) and display shows "RINS-
ING". When rinsing is complete, display shows "RINSE AGAIN?"
"YES NO".
Press button if another rinse is needed, otherwise press
11.
ton. Display shows "POLISH?" "YES".
Press button for YES and oil is "polished" by circulating it
12.
through the filtering system. The display shows "5:00 NO=STOP".
If desired, press button to stop the polishing, otherwise the oil is
polished for 5 minutes.
Once the oil is polished, the display shows "FILL VAT?" "YES".
Press button and display shows "CLOSE DRAIN". Push in on
drain knob to close drain (Figure 3), display shows "FILLING" and
vat then re-fills with oil.
Once full, display shows "IS POT FILLED?" "YES NO". Press
13.
28
Model CFE-415, 427
button
but-