Henny Penny CFE-415 Operator's Manual page 15

3-1
OPERATING
COMPONENTS
(CONT.)
Fig.
Item Description
No.
3-1 1
3-1 2 Digital Display
3-1 3
3-1 4
3-1 5
3-1 6
3-1 7
3-1 8
April 2015
Refer to Figures 3-1, 3-2 & 3-3 in conjunction with the description of
the functions below.
Lights when the control calls for heat and the shortening should start heating
Shows all the functions of the Cook Cycle, Program Mode, Diagnostic Mode
and alarms
Flashes when the shortening temperature is not at the proper temperature for
dropping product into the frypot
Lights when the shortening temperature is 5°F below setpoint to 15°F above
setpoint, signaling product can now be cooked
Press to display current fryer information and status; if pressed in the Program
Mode, it shows previous settings; pressing this along with
Information Mode which has historic information on the Operator and fryer
performance
Used to access the Filter Menu; also used for ▲ or ▼buttons
Press to access Program Mode; once in the Program Mode, it is used to advance
to the next setting; if pressed along with
which has historic information on the Operator and fryer performance; it also
allows access to the English-Spanish settings, diagnostics, Clean-Out Mode,
and Manual Mode, if pressed before the appropriate button
Used to stop Cook Cycles and to stop the timer at the end of a Hold Cycle; it is
also used to program a Manual Program for nonstandard products
11
Model CFE-415, 427
Function
it accesses the Information Mode
accesses the