Henny Penny CFE-415 Operator's Manual page 45

4-1
INFORMATION MODE
DETAILS
(CONT.)
March 2015
2. P-LOG (power-up log)
Press ▼ and "2A. (date & time) *NOW* shows in display. This is the
present date and time.
Press ▼ and the latest power-up is shown, "2B. (date, time,) PWR-
UP".
Press ▼ and the next latest power-up date is shown. Upto 10 power-ups
(2B to 2K) can be stored in P-LOG section.
Press to continue onto the heat-up log.
3. HEAT-UP'S
Press ▼ and "3A. (date & time) *NOW* shows in display. This is the
present date and time.
Press ▼ and the latest heat-up is shown, along with the heat-up rate,
ex: "3B. MAY-22, 8:37A 1.25". The heat rate is the maximum rate
(degrees/second) the controller recorded during the shown time frame.
Press ▼ and the next latest heat-up is shown. Up to 10 heat-ups (3B to
3K) can be stored in the Heat-Up Log.
Press to continue onto the COOK DATA.
4. LEFT COOK DATA
Press ▼ to step through the following data:
Function
Time of last Cook Cycle started
Product (last product cooked)
Ready? (fryer ready before start?)
Drop detect status
Drop adjust (real time seconds)
Cook time adj (clock adjust)
Actual elapsed cook time (seconds)
Stopped: Time remaining, or secs past done
"Slow cook" for this cycle?
Overloaded? (Bad batch)
Avg Temp during Cook Cycle
Max voltage during Cook Cycle
Min voltage during Cook Cycle
Max amps during Cook Cycle
Min amps during Cook Cycle
Press to continue onto the RIGHT COOK DATA.
41
Model CFE-415, 427
Display
4A. STARTED 10.25A
4B. PRODUCT -1-
4C. READY? YES
4D. DETECT X NO
4E. DROP ADJ T-14
4F. CK TM ADJ -13
4G. ACT TIME 2:23
4H. STOP DONE+1
4I. SLOW? NO
4J. OVRLD? NO
4K. AVG TMP 343°F
4L. MAX VOLT 99%
4M. MIN VOLT 97%
4N. MAX AMPS 33
4O. MIN AMPS 33
41. LOAD SIZE