Henny Penny CFE-415 Operator's Manual page 75

5-5
DIAGNOSTIC MODE
DETAILS
(CONT.)
March 2015
The number of Stopped Too Soon Cycles for this batch of
shortening is reported next. Note that this value does not yet
include the Cook Cycles from today.
"D7: BEFORE TODAY "
"D7: 3% OF LOADS"
"D7: WERE STOPPED"
"D7: TOO SOON"
"D7: ON THIS OIL"
(Press ▼)
Finally, the controller identifies percentage of Stopped Too Soon Cycles
for the previous batch of shortening:
"D7: LAST OIL"
"D7: 5% OF LOADS"
"D7: WERE STOPPED"
"D7: TOO SOON"
D 8: "Beeped *DONE* Too Long" Report
Diagnostic Report section 8 reveals how many Cook Cycles beeped
"*DONE*" for more than 20 seconds before the user pressed the Timer
button to stop the cycle. This is strictly a user error.
The controller cannot detect when the product is actually removed from
the fryer. It only identifies how long the
controller beeped "*DONE*" before the user pressed
alarm.
The first item displays the percent of today's Cook Cycles that beeped
"*DONE*" for more than 20 seconds before the user pressed
it. All products are grouped into one count.
"D8: 10% OF LOADS"
"D8: BEEPED 'DONE'"
"D8: TOO LONG"
"D8: TODAY"
(Press ▼)
71
Model CFE-415, 427
to stop the
to stop