Henny Penny CFE-415 Operator's Manual page 74

5-5
DIAGNOSTIC MODE
DETAILS
(CONT.)
March 2015
"D6: BEFORE TODAY,"
"D6: COOKED"
"D6: BEFORE READY"
"D6: 8 TIMES"
"D6: ON THIS OIL"
(Press ▼)
Finally, the controller identifies how many times the not ready warning
was generated for the previous batch of shortening:
"D6: LAST OIL,"
"D6: COOKED"
"D6: BEFORE READY"
"D6: 24 TIMES"
D 7: "Stopped Too Soon" Report
This section shows how many Cook Cycles were stopped early by
the user, before the cook timer had counted down to "0:00" and the
"*DONE*" was displayed. This is a user error.
Cycles that are canceled after cooking for less than 30 seconds are not
counted here. For example, if a cycle is accidentally started, and the
Cook Cycle is canceled after just a few seconds, this cycle will not be
counted as a "Stopped Too Soon" Cycle.
Also, some allowance is given for stopping a cycle a little early. The
user can cancel the cycle up to 10 seconds early without penalty.
Otherwise, however, any cycle that was stopped with more than 10
seconds remaining (0:10) on the cook clock with be counted as a
"STOPPED TOO SOON" Cycle.
The first item displays what percent of cycles today were stopped with
more than 0:10 remaining. All products are grouped into one count.
"D7: 8% OF LOADS"
"D7: WERE STOPPED"
"D7: TOO SOON"
"D7: TODAY"
(Press ▼)
70
Model CFE-415, 427