Omron H3CR-A Manual page 279

H5RA
Connections
Contact Input
Resistance when contacts are
closed: 1 k$ max.
Resistance when contacts are
open: 100 k$ min.
Output Specifications
Circuit Configuration
Terminal Arrangement (Bottom Terminals)
Terminal A1 A2
number
Function --- ALM
Terminal B1 B2
number
Function --- BATCH
Note: 1. Terminals B4 through B11 of H5RA-8 are not to be used.
2. Use the input common terminals even though they are internally connected to the output common terminals.
Connections
Note: When using an inductive load, be sure to connect a diode to
protect the output transistor from counterelectromotive force.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. L80-E1-3
Solid-state, No-voltage Input
Residual voltage Vi between input
terminals when transistor is ON:
2 V max.
Impedance when transistor is OFF:
100 k$ min.
Note: Be sure to connect a diode to protect the output transistor from
counterelectromotive force.
A3 A4 A5 A6
RUN OUT 1 OUT 2 OUT 3
B3 B4 B5 B6
READY OUT 9 OUT 10 OUT 11
See note
Solid-state, Voltage Input
Output type
Dielectric strength
Permissible current
Residual voltage
Leakage current
A7 A8 A9 A10
OUT 4 OUT 5 OUT 6 OUT 7
B7 B8 B9 B10
OUT 12 OUT 13 OUT 14 OUT 15
H5RA
Residual voltage Vi between input
terminals when transistor is ON:
2 V max.
Impedance when transistor is OFF:
100 k$ min.
Solid-state open collector
30 V
100 mA
1.0 V max.
0.1 mA max.
A11 A12 A13 A14
OUT 8 S1 S2 ---
(power) (power)
B11 B12 B13 B14
OUT 16 OUTPUT OUTPUT FG
COM COM
279