Table of Contents
Advertisement
Solid-state Timer
H3CR
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions
or comments. Refer to Warranty and Application Considerations (page 52), and Safety Precautions (page 22, 44, 51).
DIN 48 ✕ 48-mm Multifunctional Timer Series
• Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low
Voltage, and EMC Directives.
• Approved by UL and CSA.
■ Broad Line-up of H3CR Series
H3CR-A
Multifunctional Timer
H3CR-A
H3CR-AS
11-pin model
H3CR-AP
H3CR-A8
8-pin model
H3CR-A8S
H3CR-A8E
8-pin with
instantaneous
contact output
model
Note: H3CR-AS, H3CR-A8S: Transistor output models
Solid-state Timer
H3CR-A ..........................................................................................................................................
H3CR-F...........................................................................................................................................
H3CR-G ..........................................................................................................................................
H3CR-H ..........................................................................................................................................
Common to ALL Timers
Operation ........................................................................................................................................
Accessories ....................................................................................................................................
Safety Precautions..........................................................................................................................
1
H3CR
H3CR-F
Twin Timer
H3CR-F
11-pin model
H3CR-FN
H3CR-F8
8-pin model
H3CR-F8N
Contents
• Lloyds/NK approvals.
• Six-language instruction manual provided.
H3CR-G
Star-delta Timer
Power OFF-delay Timer
H3CR-G8L
H3CR-HRL
8-pin model
H3CR-G8EL
H3CR-H8L
H3CR-H8RL
H3CR-H
11-pin model
8-pin model
2
26
34
42
52
54
58
Advertisement
Table of Contents
Related Manuals for Omron H3CR
Summary of Contents for Omron H3CR
- Page 1 Solid-state Timer H3CR Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and Application Considerations (page 52), and Safety Precautions (page 22, 44, 51).
-
Page 2: Model Number Structure
For the most recent information on models that have been • Length, when panel-mounted with a Socket, of 80 mm or less. certified for safety standards, refer to your OMRON website. • 11-pin and 8-pin models are available. Model Number Structure ■... - Page 3 H3CR-F ■ Accessories (Order Separately) Adapter, Protective Cover and Hold-down Clip Name/specifications Models Flush Mounting Adapter Y92F-30 Y92F-73 *1 Y92F-74 *1 Y92A-48B *2 Protective Cover Hold-down Clip For PF085A Socket Y92H-8 (Sold in sets of two) For PL08 or PL11 Sockets...
-
Page 4: Specifications
Note: 1. A power supply with a ripple of 20% max. (single-phase power supply with full-wave rectification) can be used with each DC Model. 2. Do not use an inverter output as the power supply. Refer to your OMRON website for details. - Page 5 H3CR-F ■ Characteristics ±0.2% FS max. (±0.2% FS ±10 ms max. in ranges of 1.2 and 3 s) Accuracy of operating time ±5% FS ±50 ms max. Setting error Reset time 0.1 s max. Reset voltage 10% max. of rated voltage ±0.2% FS max.
- Page 6 H3CR-F Connections ■ Block Diagrams H3CR-F/-F8/-FN/F8N ■ I/O Functions Inputs Outputs Control output ■ Terminal Arrangement H3CR-F8/-F8N H3CR-F/-FN Note:...
-
Page 7: Operation
H3CR-F Operation ■ Timing Chart Operating mode Timing chart Flicker OFF start Flicker ON start Note: 1. Nomenclature... - Page 8 H3CR-F Dimensions Note: H3CR-F H3CR-FN × H3CR-F8 H3CR-F8N × Dimensions with Flush Mounting Adapter Y92F-30 Flush Mounting Adapter (Order Separately) Mounting Hole Dimensions (Conform to DIN 43700.) Note: 1. Y92F-73 Flush Mounting Adapter (Order Separately) Note: Note:...
- Page 9 H3CR-F Y92F-74 Flush Mounting Adapter (Order Separately) Note: Note: Dimensions with Front Connecting Socket Dimensions with Back Connecting Socket P2CF-08-@/P2CF-11-@ P3G-08/P3GA-11 Note: ■ Accessories (Order Separately) Protective Cover Hold-down Clip Y92A-48B Y92H-8 Hold-down Clip Y92H-7...
- Page 10 Operation (Common) Note: ■ Basic Setting • H3CR-F Twin Timers Setting of Selectors Selection of Operating Mode • H3CR-A Multifunctional Timer Selection of Time Unit and Time Range • H3CR-A Multifunctional Timer ✕ ✕ ✕...
- Page 11 H3CR • H3CR-G Star-delta Timers • H3CR-H Power OFF-delay Timers Setting of Time ■ Using the Time Setting Ring for H3CR-A/-G Locking the Set Time Limiting the Setting Range...
- Page 12 H3CR Accessories (Order Separately) (Common) Note: Note: Flush Mounting Adaptor Y92F-30 Panel Cutout Note1: − − Note2: Y92F-70/-73 Panel Cutout ± ± ± Note: Note: Y92F-71/-74 − − ± ± Note: Note:...
- Page 13 Four, 5 dia. Back Connecting Socket 81 dia. +0.6 ±0.4 Unit insertion ±0.4 direction * +0.6 * Insert H3CR timer unit from front side of adapter. 43.2 Track Mounting/Front Connecting Socket P2CF-08 Eight, M3.5 × 7.5 sems 70 max. 35.4 Terminal Arrangement/ Two, 4.5 dia.
- Page 14 H3CR Back Connecting Socket Terminal Arrangement/ P3G-08 Internal Connections (Bottom View) P3GA-11 Terminal Arrangement/ Internal Connections (Bottom View) Finger Safe Terminal Cover Conforming to VDE0106/P100 Y92A-48G (Attachment for P3G-08/P3GA-11 Socket) × × Mounting Track PFP-100N, PFP-50N PFP-100N2 ± ± ±...
- Page 15 H3CR Time Setting Ring/Panel Cover for H3CR-A/-G Using the Time Setting Ring for H3CR-A/-G Note: Locking the Set Time Limiting the setting range Y92S-27 Y92S-28 Y92S-28 Y92P-48GL Y92P-48GB Time Setting A Time Setting B Time Setting C Light Gray Black...
-
Page 16: Changing The Setting
Timer may break or malfunction. service life. Always use a load current that does not Do not use H3CR-A models (except for H3CR-A@S) in flicker mode exceed the rating, and if a heater is used, use a thermal switch in the at the lowest selector setting, or H3CR-F models at the lowest load circuit. -
Page 17: Power Supplies
Do not use solvents such as thinner. Use commercially available alcohol. When the power is turned on, a rush current (refer to your OMRON website) may flow briefly and the timer may not start if there is insufficient power capacity. Use a power supply with sufficient capacity. -
Page 18: Terms And Conditions Agreement
Terms and Conditions Agreement Read and understand this catalog. Warranties. Limitation on Liability; Etc. Suitability of Use. Programmable Products. Performance Data. Change in Specifications. Errors and Omissions. - Page 19 The Netherlands Hoffman Estates, IL 60169 U.S.A. Tel: (31)2356-81-300/Fax: (31)2356-81-388 Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 © OMRON Corporation 1996-2020 All Rights Reserved. OMRON (CHINA) CO., LTD. OMRON ASIA PACIFIC PTE. LTD. In the interest of product improvement, Room 2211, Bank of China Tower, No.