Omron H3CR-A Manual page 177

H5CR
Nomenclature
Display
1. Power indicator
2. Signal input indicator
3. Reset indicator
4. Gate indicator
(not included in the H5CR-L)
5. Key protection indicator
(not included in the H5CR-L)
6. Control output indicator
7. Present value
(character height: 8mm)(Non
significant zeroes suppressed)
8. Set value
(character height: 4 mm)
(Indicates value in set function mode)
9. Mode indicator
10. Timing indicator
Factory Settings
The following table shows the timer settings when it is shipped. Please change the settings as necessary to suit the system before operation.
Settings and the display receive power from the internal battery and are therefore unaffected by external power interruptions.
Model
Time range
Present value
Presets
UP/DOWN mode
Output mode
Output time
Input signal time
Key protect level
Note: With the initial settings, there will be no output even if the power supply is connected. External inputs and outputs cannot be used
without a power supply.
2 4
3
1
7
9
14
H5CR-B (Standard)/H5CR-S (Short body)
- -. - -s
0.00 s
0.00 s
UP
A: Signal on delay (I)
Hold
20 ms
KP-1
10
11. Increment keys (1 to 4)
5
12. Display key
6
13. Mode key
8
11
14. Reset key
13 12
H5CR-L (Basic)
---
Operation key
(Used to change the
corresponding digit of the set
value. Used to change data in the
set mode.)
(Switches to the present value
display.)
(Switches from run mode to
set mode. Changes items in the
set mode.
(Resets timing and outputs.)
H5CR
177