Omron H3CR-A Manual page 236

H5F
Multiple-day Operation
Example: ON at 10:00 p.m. each day from Monday to Friday
and OFF at 7:00 a.m. on the following day.
Display and key operation (shaded portion indicates blinking of
the indicator.)
1 Set the time to 10:00 p.m.
with the h and m/ WD
P
Keys.
2 Press the Write Key.
3 Set the time to 7:00 a.m.
with the h and m/ P WD
Keys.
4 Press the Write Key.
Note: If the initial display is different from that shown above,
press the Write Key several times until "
appears.
236
5 Press the Mode Key to
set the Operation day
setting mode.
6 Set Sunday and Satur-
day as non-operation
days with the d and
Write Keys.
7 Press the Mode Key.
(The Run mode will be
set.)
8 (Displays the current
time and the next opera-
tion time.)
"
Pulse Output Operation
Example: To turn on the output for 30s at 8:25 a.m., from
Monday to Friday. First set the Operation time set-
ting mode with the Mode Key.
Display and key operation (shaded portion indicates blinking of
the indicator.)
1 Press the TMR/ P key to
specify the pulse opera-
tion.
2 Press the m/ P Key to
set a pulse width of 30 s.
Press the Write Key.
3 Set the On time to 8:25
a.m., by using the h and
m/ WD Keys. Press
P
the Write Key.
4 Press the Mode Key to
set the operation date
setting mode.
Note: The initial display may be different from that shown
above, but disregard this and continue the key operation.
H5F
5 Use the d Key and Write
Key to specify Sunday
and Saturday as non-
operation days.
6 Press the Mode Key.
(The Run mode will be
set.)
7 (Displays the current
time and the next opera-
tion time.)