Omron H5S Manual
  1. Manuals
  2. Brands
  3. Omron Manuals
  4. Timer
  5. H5S -
  6. Manual

Omron H5S Manual

Hide thumbs Also See for H5S:
Table of Contents

Advertisement

Quick Links

★How would you like to use the Time Switch?
The H5S Time Switch offers simple operation to set various
time controls.
You want the Time Switch to turn an
output ON/OFF at a scheduled time.
<Cases> • You want to put a machine into
operation between certain times.
• You want to turn on a light between
certain times.
Timer operation is recommended.
Output
8:00
You need a pulse-output for
a short time.
<Cases> • You need an ON pulse-output to
activate a device for preheating.
• You want to ring a chime or time
signal.
Pulse-output operation is recommended.
10s
Output
10:00
※ Refer to the main part to know the other functions or those details.
17:00
4-1
4-3
You want the Time Switch to turn
outputs ON/OFF over several days.
<Cases> • You want to put a machine into operation
from 22:00 to 8:00 in the next morning.
• You want to turn ON an output at 10:00 on
Monday and turn it OFF at 17:00 on Friday.
Multiple-day operation is recommended.
Mon.
Tue.
Output
You want the Time Switch to turn
outputs ON/OFF at the same intervals.
<Case> • You want to water plants for five minutes
every hour from 9:00 to 17:00.
Cyclic operation is recommended.
5 min
55 min
Output
Start time
Wed.
4-2
Stop time
4-4

Advertisement

Table of Contents
loading

Related Manuals for Omron H5S

Summary of Contents for Omron H5S

  • Page 1 ★How would you like to use the Time Switch? The H5S Time Switch offers simple operation to set various time controls. You want the Time Switch to turn an You want the Time Switch to turn output ON/OFF at a scheduled time.
  • Page 2 Weekly Yearly Yearly 2. Nomenclature 2 chnls 2 chnls 4 chnls <Front panel> <Weekly 2 chnls> MODE switch HOLIDAY/ DAY Keys HOLIDAY / DOWN Key WRITE Key WRITE OUT ON/OFF AUTO switches PULSE m/PLS Key OUT1 OUT2 COPY TIMER h Key RESET PULSE TIME ADJ...

  • Page 3: Time Adjustment

    Weekly Yearly Yearly 3. Time Adjustment 2 chnls 2 chnls 4 chnls 【Example】 The current time (day/hour/minute) is set to Saturday 17:28. ① Set the Mode Switch to RUN. color indicates flashing. ② Press TIME ADJ for 2 s or more. symbol flashes.

  • Page 4: Basic Operations

    4. Basic Operations Weekly Yearly Yearly 4-1. Ordinary Timer Operation 2 chnls 2 chnls 4 chnls 【Example】 The Time Switch turns ON circuit 1 or circuit 2 at 8:30 and turns it OFF at 17:15 from Monday through Friday. 8:30 17:15 8:30 17:15 8:30 17:15 8:30...
  • Page 5 ≪Note≫ • If multiple settings are required, repeat the steps ② through ④. • Both the ON and OFF times must be set. • All the set weekly programs can be checked by pressing WRITE in program setting mode. • When the Mode Switch is set to P1 or P2 (to PRGM for 4 channel type), the Time Switch stop automatic operation.

  • Page 6: Multiple-Day Operation

    Weekly Yearly Yearly 4-2. Multiple-day operation 2 chnls 2 chnls 4 chnls 【Example1】 The Time Switch turns circuit 1 or circuit 2 ON continuously between 8:30 on Monday and 17:15 on Friday. 8:30 17:15 Number of remaining steps ① Set the Mode Switch to P1 or P2. ※1 color indicates flashing.
  • Page 7 【Example 2】 The Time Switch turns ON circuit 1 or circuit 2 at 22:00 from Monday through Friday and turns it OFF at 8:00 each following morning. 22:00 8:00 22:00 8:00 22:00 8:00 22:00 8:00 22:00 8:00 Number of remaining steps ①...
  • Page 8 Weekly Yearly Yearly 4-3. Pulse-output Operation 2 chnls 2 chnls 4 chnls 【Example】 The Time Switch turns ON circuit 1 or circuit 2 for 30 seconds at 8:25 am from Monday through Saturday. AM8:25 Number of remaining steps ① Set the Mode Switch to P1 or P2. ※1 color indicates flashing.
  • Page 9 ≪Note≫ • If multiple settings are required, repeat the steps ② through ④. • Both the ON time and pulse width must be set. WRITE • All the set weekly programs can be checked by pressing in program setting mode. •...

  • Page 10: Cyclic Operation

    Weekly Yearly Yearly 4-4. Cyclic Operation 2 chnls 2 chnls 4 chnls 【Example】 The Time Switch turns circuit 1 or circuit 2 ON for 5 minutes and OFF for 1 hour 55 minutes repeatedly from 8:00 to 19:00 on Sunday. Start Stop 5 min...
  • Page 11 ⑤ Press WRITE . ※2 Set the ON time period with SUN MON TUE WED THU ⑥ Press WRITE . ※2 Set the OFF time period with SUN MON TUE WED THU ⑦ Press WRITE to confirm the settings. ※1 If one or more programs have already been set, the display starts showing the set programs. repeatedly until "-- : --"...

  • Page 12: Clearing The Settings

    Weekly Yearly Yearly 4-9. Clearing the Settings 2 chnls 2 chnls 4 chnls 【Example 1】 Clearing a part of the settings. color indicates flashing. ① Set the Mode Switch to P1 or P2 and select a setting to be cleared. See Section 4-5 for 4 channel type.
  • Page 13 【Example 2】 Clearing all the settings of each circuit. color indicates flashing. ① Set the Mode Switch to the position of the circuit whose settings are to be cleared. See Section 4-5 for 4 channel type. SUN MON TUE WED THU ②...
  • Page 14 Weekly Yearly Yearly 5-2. Program Check Function 2 chnls 2 chnls 4 chnls The set days and times when output turns ON and OFF over the course of one week can be displayed in the sequence the Time Switch is to operate. color indicates flashing.

  • Page 15: Checking The Settings

    Weekly Yearly Yearly 5-3. Checking the Settings 2 chnls 2 chnls 4 chnls The set times for one day can be checked. color indicates flashing. ① Press one of the DAY keys for 2 s or more in run mode to check settings for the day. (“chec”...
  • Page 16 Weekly Yearly Yearly 5-5. Summer Time (DST) Adjustment (Manual) 2 chnls 2 chnls 4 chnls ＋1h Each time is pressed for 2 s or more, the current time switches between the current time and the current time+1 hour. SUN MON TUE WED THU SUN MON TUE WED THU ≪Note≫ ...

  • Page 17: Display Switching

    Weekly Yearly Yearly 5-7. Display Switching 2 chnls 2 chnls 4 chnls Each time is pressed for 2 s or more, the displayed content switches as shown below. Current time Total time Total count hour Next operation (Factory setting) ※  ※ ...
  • Page 18 Weekly Yearly Yearly 7. Operation while the Power Supply is OFF 2 chnls 2 chnls 4 chnls The display can be activated even when the power is OFF. The current time can be displayed and settings can be made. ●While power is OFF, output as well as the output indicator and the power indicator are turned OFF.

  • Page 19: Troubleshooting

    Weekly Yearly Yearly 11. Troubleshooting 2 chnls 2 chnls 4 chnls ◆Self-check function When an error occurs, the following error codes are displayed. Error code Meaning Output Countermeasures CPU error Press RESET Memory error Press RESET ◆Troubleshooting If there is a problem with the Time Switch, check the following items. Problems Check items Section...

Table of Contents