Omron H3CR-A Manual page 205

H5CN
P3GA-11
27 dia.
Mounting Track
PFP-100N/PFP-50N (see note) (for PF085A)
(see note 2)
Note: 1. Meets DIN EN50 022
2. This dimension applied to PFP-50F.
Adapter for Flush Mounting
Y92F-30
10.9
Protective Cover
The protective cover shields the front panel, particularly the count value setting section from
dust, dirt, and water drip, as well as prevents malfunctioning of the timer due to static electricity.
Note: 1. The soft protective cover allows the set value to be set by depressing the thumbwheel
switches through it.
2. The hard protective cover prevents the set value from being altered due to accidental contact
with the push type thumbwheel switch.
Eleven, M3.5
sems
Y92A-48D
(see note 1)
(Soft cover)
Terminal Arrangement
(Bottom View)
End Plate
PFP-M
Panel Cutout
The standard panel cutout
is as below. (Panel cutout
conforms to DIN 43700.)
Note: 1. Panel thickness: 1 to 5 mm
2. When gang-mounting the Unit, the orientation of the
Adapter must be changed depending on whether
Units are mounted horizontally or vertically.
3. No cover:
With hard cover: N = {48n -- 2.5 + (n -- 1) x 3}
Y92A-48B
(see note 2)
(Hard cover)
H5CN
Spacer
PFP-S
Gang-mounting of more
than 2 units (horizontally)
N
+1
N = (48n -- 2.5) /
--0
+1
/
--0
205