H3M - Omron H3CR-A Manual

Solid-state Timer
Solid-state Timer with Variable Time
Ranges
Four time ranges are selectable per timer unit.
Wide timing range of 0.05 second to 30 hours can
be covered by a combination of five timer units.
Standard surface mounting type is easily convert-
ible to flush mounting type with the use of a special
adapter (Y92F-40).
Requires only 40 x 50 mm for mounting space.
Equipped with power-ON & time-out indicators.
Ordering Information
Operation/resetting system p / g y
Time-limit operation/ p /
self-resetting lf tti
Note: 1. Specify both the model number and supply voltage when ordering.
2. Sockets and adapters for surface/track mounting are available optionally and therefore, place the order for them as necessary.
Timer hold-down clips (F-hook and L-hook) are supplied with the timer.
Accessories (Order Separately)
Adapter
Y92F-40
Specifications
Time Ranges
Four time ranges are available for each timer by changing the time range selector switch positions to different combinations.
Time range code
A 0.05 to 0.5 s
B 0.1 to 1 s
C 0.3 to 3 s
Time range code
D 0.1 to 1 min
E 0.3 to 3 min
132
Time-limit Instantaneous
contact t t contact
DPDT ---
SPDT SPDT
Time range selector switch
0.5 to 5 s
1 to 10 s
3 to 30 s
1 to 10 min
3 to 30 min
t t
Surface mounting

H3M

H3M-H
0.05 to 0.5 min
0.1 to 1 min
0.3 to 3 min
Time multiplying key
0.1 to 1 hrs
0.3 to 3 hrs
H3M
RC
Mounting
Flush mounting
H3M with Y92F-40 adapter
H3M-H with Y92F-40 adapter
0.5 to 5 min
1 to 10 min
3 to 30 min
1 to 10 hrs
3 to 30 hrs