Omron H3CR-A Manual page 237

H5F
Partial Operation on Specified Day
ON at 8:30 a.m. and OFF at 0:30 p.m..
ON at 1:15 p.m. and OFF at 5:15 p.m. from Monday to Friday.
ON at 8:30 a.m. and OFF at 0:30 p.m. on Saturday.
(To specify Saturday as a special day)
First set the Operation time setting mode with the Mode Key.
Display and key operation (shaded portion indicates blinking of
the indicator.)
1 Press the Select day Key
to light the special day op-
eration (S) indicator (see
note 2). Set the ON time
to 8:30 a.m. with the h
and m/ P WD keys.
(See note 1)
2 Press the Write Key.
3 Press the h and m/ P
WD Keys to set the OFF
time to 0:30 p.m..
4 Press the Write Key.
Press the h and m/ P
WD Keys to set the ON
time to 1:15 p.m..
5 Press the Write Key.
Press the h and m/ P
WD Keys to the specify
5:15 p.m..
6 Press the Write Key.
Press the Mode Key to
set the Operation date
setting mode.
7 Use the d and Write
Keys to specify Sunday
as non-operation day
and Saturday as a spe-
cial day (see note 3).
8 Press the Write Key.
(The run mode will be
set.)
9 (The blinking Saturday
indicator indicates that
Saturday is a special
day.)
Note: 1. If the display is for the pulse operation, change the operation mode to the timer operation
with the TMR/ P Key.
2. Even in the pulse operation, a specified day may be specified by displaying the special
day indicator with the Select key.
3. At each depression of the Write Key, "
Canceling the Setting
To cancel the setting of the circuit.
Display and key operation (shaded portion
indicates blinking of the indicator.)
1 Press the Mode Key to
specify the Operation date
setting or Operation time
setting mode.
2 Press the CLR key.
3 (Displayed for 1 s)
4 All the set operation
times, pulse widths, and
operation days are
erased.
" mark shifts as follows;
H5F
237