Omron H3CR-A Manual page 17

H3CR-A
Mounting Track 50 cm (l) x 7.3 mm (t)
1 m (l) x 7.3 mm (t)
1 m (l) x 16 mm (t)
End Plate PFP-M
Spacer PFP-S
Protective Cover
Time Setting Ring
Setting a specific time
Limiting the Setting Range
Specifications
General
Item
Operating mode
Pin type
Input type
Time-limit output type
Instantaneous output type
Mounting method
EMC
Approved standards
*The internal circuits are optically isolated from the output. This enables application of either NPN or PNP transistors.
Time Ranges
Time unit
Setting 0 Instantaneous output (To obtain instantaneous output, set to below 0.) (see note)
1.2 0.05 to 1.2
3 0.3 to 3
12 1.2 to 12
30 3 to 30
Note: Instantaneous output is available with all H3CR-A models.
PFP-50N
PFP-100N
PFP-100N2
Y92A-48B
Y92S-27
Y92S-28
H3CR-A/-AS
A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
11-pin
No-voltage input
H3CR-A/-A8: Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP)*
---
DIN track mounting, surface mounting, and flush mounting
Emission Enclosure:
Emission AC Mains:
Immunity ESD:
Immunity RF-interference:
Immunity Conducted Disturbance: ENV50141: 10 V (0.15 to 80 MHz) (level 3)
Immunity Burst:
UL508, CSA C22.2 No.14, LR/NK
Conforms to VDE0435/2021, VDE0110
Conforms to EN50081-2, prEN50082-2
s (sec)
0.12 to 1.2
Panel Cover
Color (Munsell No.)
Light Gray (5Y7/1)
Black (N1.5)
Medium Gray (5Y5/1)
Note: The Time Setting Ring and Panel Cover are sold together.
Hold-down Clip
Specification
For PL08 and PL11 Sockets
For PF085A Socket
H3CR-A8/-A8S
A: ON-delay
E: Interval
8-pin
---
EN55011 Group 1 class A
EN55011 Group 1 class A
IEC801-2: 4 kV contact discharge (level 2)
8 kV air discharge (level 3)
ENV50140: 10 V/m (80 MHz to 1 GHz) (level 3)
IEC801-4: 2 kV power-line (level 3)
2 kV I/O signal-line (level 4)
min h (hrs)
H3CR-A
Model
Y92P-48GL
Y92P-48GB
Y92P-48GM
Model
Y92H-7 (not for H3CR-A8EL)
Y92H-1 (for only H3CR-A8EL)
Y92H-8 (not for H3CR-A8EL)
Y92H-2 (for only H3CR-A8EL)
H3CR-A8EL/-A8E
Relay output (SPDT)
Relay output (SPDT)
x10 h (10 h)
1.2 to 12
3 to 30
12 to 120
30 to 300
17