Omron H3CR-A Manual page 179

H5CR
Operational Overview
This flowchart shows operation common to all H5CR models. Refer to the following Setting Item Table for details
on the operation of specific models.
Run mode
Present value,
set value
Note: 1. Set values are changed using the increment keys
(1 to 4).
2. The large arrows indicate the parameter displayed first
when the mode is changed with the MODE or DISPLAY
key.
3. *The key protection is not included in the H5CR-L.
Setting mode
Press the
MODE key
Press the
DISPLAY key
Press the
MODE key
Timing range
Press the
MODE key
UP/DOWN mode
Press the
MODE key
Output mode
Press the
MODE key
Output time
Press the
MODE key
Input signal time
Press the
MODE key
*
Key protect level
H5CR
179