Omron H3CR-A Manual page 134

H3M
Operation
Timing Chart
H3M
Dimensions
Note: All units are in millimeters unless otherwise indicated.
H3M(-H)
Accessories (Order Separately)
Y92F-40 Adapter with Flush Mounting
Note: When two or more timers mounted in line are to be continuously energized at the same time after the lapse of
the set time, be sure to limit the carry current to less than 1 A. When using the timers at an ambient temperature
of more than 40"C, be sure to reset the timers immediately after the set time has elapsed.
Track Mounted/Front Connecting Socket
PF085A
Eight, M3.5 ' 7 sems
Two, 4.5 dia.
holes
134
H3M-H
Terminal Arrangement
(Top View)
Mounting Holes
Four, 5 dia. or M4 holes
Note: PF085A can be used as a
front connecting socket.
H3M
Mounting Height of
Timer with Socket