Omron H3CR-A Manual page 139

H3FA
Operation
Timing Chart
H3FA-A/H3FA-B/H3FA-SA/H3FA-SB
Standard Operation (ON-delay Operation)
(See note)
Note: When using the 12/24 VDC operated
timer with a 12 VDC power supply,
short-circuit terminals 13 and 15.
OFF-delay Operation by External Signal
(See note)
Note: When using the 12/24 VDC operated
timer with a 12 VDC power supply,
short-circuit terminals 13 and 15.
H3FA-AU/H3FA-BU/H3FA-SAU/H3FA-SBU
One-shot Output Operation
(See note)
Note: 1. When using the 12 VDC operated timer suffixed
-SjU, short-circuit terminals 13 and 15.
2. T denotes set time.
t , t , t , t , < T
1 2 3 4
Integration Operation
(See note)
Note: 1. Control output is provided when the set time
(T + T or T + T
1 2 3
2. When using the 12/24 VDC operated timer with
a 12 VDC power supply, short-circuit terminals
13 and 15.
OFF-delay Operation by External Signal
(See note)
Note: 1. When using the 12 VDC operated timer suffixed
-SjU, short-circuit terminals 13 and 15.
2. T denotes set time.
t , t , t , t , < T
1 2 3 4
H3FA
) is up.
4
139