Table of Contents
Advertisement
96
Seats and stowing
Before starting the engine: adjust the
#
driver's seat, the head restraints, the
steering wheel or the mirror and fasten
your seat belt.
& WARNING Risk of injury due to head
restraints which are not fitted or are
adjusted incorrectly
If head restraints are not fitted or are adjus‐
ted incorrectly, they cannot provide protec‐
tion as intended.
There is an increased risk of injury in the
head and neck area, e.g. in the event of an
accident or when braking.
Always drive with the head restraints
#
fitted.
Before driving off, make sure for every
#
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the
front and rear seats. Otherwise, you cannot
adjust the height and angle of the head
restraints correctly.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
To move forwards: pull the head restraint
#
forwards.
To move backwards: press release knob
#
and push the head restraint backwards.
Extending the rear seat head restraints elec‐
trically from the front
Requirements:
The power supply is switched on.
R
Briefly press button 1.
#
%
Depending on the model, button
ted on the door control panel on the driver's
1
side.
Automatically extending or retracting the
rear seat head restraints
To extend: fasten seat belt.
#
The head restraint is extended.
1
is loca‐
Advertisement
Table of Contents
