Table of Contents
Advertisement
210 Driving and parking
The warning occurs if appropriate traffic signs or
road markings are recognised and pedestrians
are present in the danger zone.
System limitations
The system may be impaired or may not function
in the following situations:
If you are driving in conditions of poor visibil‐
R
ity, e.g. due to insufficient illumination of the
road, highly variable shade conditions, or due
to rain, snow, fog or heavy spray.
You are affected by glare, e.g. from oncoming
R
traffic, the sun or reflections.
The windscreen is dirty in the area of the
R
multifunction camera, or the camera is mis‐
ted up, damaged or covered.
If the traffic signs are hard to detect, e.g. due
R
to dirt or snow, or because they are covered,
or due to insufficient lighting.
If the information on the navigation system's
R
digital map is incorrect or out of date.
The signs are ambiguous, e.g. traffic signs on
R
construction sites or in adjacent lanes.
Setting Traffic Sign Assist
Multimedia system:
Vehicle
k Assistance
,
.
Sign Assist
Activating /deactivating automatic adoption
of speed limits
Requirements:
Active Distance Assist DISTRONIC is activa‐
R
ted.
Select
Adopt
limit.
#
Activate O or deactivate ª the function.
#
The speed limits detected by Traffic Sign
Assist are automatically adopted by Active
Distance Assist DISTRONIC.
Displaying detected traffic signs in the
media display
Select
Display in
#
Activate O or deactivate ª the function.
#
Adjusting the type of warning
Select
Visual &
#
Adjusting the warning threshold
Traffic
This value determines the speed at which a
.
warning is issued when exceeded.
Select
Warning
#
Set the desired speed.
#
COMAND.
audible,
Visual
or None.
threshold.
Advertisement
Table of Contents
