Table of Contents
Advertisement
Open the emergency spare wheel bag and
#
remove the collapsible spare wheel.
Inflating the collapsible spare wheel
Requirements:
Mount the collapsible spare wheel as descri‐
R
bed. (
page 406)
→
Remove the tyre inflation compressor from
R
the stowage well under the boot floor.
(
page 371)
→
* NOTE Damage to the collapsible spare
wheel when lowering the vehicle
Lowering the vehicle without previously
inflating the collapsible spare wheel can
damage its rim.
Inflate the collapsible spare wheel using
#
the tyre inflation compressor before
lowering the vehicle.
* NOTE Overheating due to the tyre infla‐
tion compressor running too long
Do not run the tyre inflation compres‐
#
sor for longer than ten minutes without
interruption.
Pull connector
4
and the hose out of the
#
housing.
Unscrew the cap from the valve on the col‐
#
lapsible spare wheel.
Wheels and tyres 409
Screw union nut
1
of the hose onto the
#
valve.
Make sure on and off switch
inflation compressor is set to 0.
Insert plug
4
into the cigarette lighter
#
socket (
page 113) in your vehicle.
→
Switch on the power supply (
#
Press on and off switch
3
#
tion compressor to I.
The tyre inflation compressor is switched on.
The tyre is inflated. The tyre pressure is
shown on manometer 2.
Pump the tyre to the specified tyre pressure.
#
The specified tyre pressure is printed on the
yellow label of the collapsible spare wheel.
When the specified tyre pressure has been
#
reached, press on and off switch
tyre inflation compressor to 0.
If the tyre pressure is higher than the speci‐
#
fied pressure, press pressure release valve
button
5
until the correct tyre pressure has
been reached.
3
of the tyre
page 138).
→
on the tyre infla‐
3
on the
Advertisement
Table of Contents
