Table of Contents
Advertisement
162 Driving and parking
Connect the trickle charger to the socket
#
using the adapter cable. Consult the manu‐
facturer's operating instructions on how to
do so.
If a 12 V adapter cable is provided with the
trickle charger, it cannot be used to retain bat‐
tery charge. Battery charge retention is not pos‐
sible using the 12 V socket on the right side of
the boot. The 12 V socket only supplies connec‐
ted accessories with power while driving.
%
You can also close the boot lid when the
trickle charger is connected.
* NOTE Damage to the connecting cable
when closing the boot lid
Do not bring the connecting cable into
#
the area of the lock when closing the
boot lid.
* NOTE Damage to the connecting cable
and the connector when the vehicle unin‐
tentionally rolls away
Keep the connector outside of the boot
#
1
when closing the boot lid.
Before switching on the ignition, remove the
#
adapter cable from the socket
Standby mode (extension of the starter bat‐
tery's period out of use)
Standby mode function
If standby mode is activated, the vehicle can be
parked for an extended period of time without
losing power.
Standby mode is characterised by the following:
the starter battery is preserved.
R
the maximum non-operational time out of
R
use is displayed in the multimedia system
display.
functions such as interior protection or tow-
R
away protection are not available.
the connection to online services is interrup‐
R
ted.
If the following conditions are fulfilled, standby
mode can be activated or deactivated using the
multimedia system:
1
again.
the engine is switched off.
R
the ignition is switched on.
R
Exceeding the vehicle's displayed non-opera‐
tional time may cause inconvenience, i.e. it can‐
Advertisement
Table of Contents
