Table of Contents
Advertisement
128 Light and sight
Folding the outside mirrors in/out
Briefly press switch 1.
#
Resetting the outside mirrors
%
If the battery has been disconnected or com‐
pletely discharged, the outside mirrors must
be reset. Only then will the automatic mirror
folding function work properly.
Briefly press switch 1.
#
Adjusting the outside mirrors
Select the required mirror using button
#
4.
Use button
2
to set the position of the mir‐
#
ror you have selected.
Engaging the outside mirrors
Press and hold button 1.
#
You will hear a click and the mirror will audi‐
bly engage in position. The mirror is set in
the correct position.
Automatic anti-dazzle mirrors function
& WARNING Risk of burns and poisoning
due to the anti-dazzle mirror electrolyte
Electrolyte may escape if the glass in an
automatic anti-dazzle mirror breaks.
The electrolyte is harmful and causes irrita‐
tion. It must not come into contact with your
skin, eyes, respiratory organs or clothing or
be swallowed.
If you come into contact with electro‐
#
3
or
lyte, observe the following:
Rinse the electrolyte from your skin
R
and seek medical attention immedi‐
ately.
If electrolyte comes into contact
R
with your eyes, rinse them thor‐
oughly with clean water and seek
medical attention immediately.
If the electrolyte is swallowed,
R
immediately rinse your mouth out
thoroughly. Do not induce vomiting.
Seek medical attention immediately.
Immediately change out of clothing
R
which has come into contact with
electrolyte.
If an allergic reaction occurs, seek
R
medical attention immediately.
The inside rear-view mirror and the outside mir‐
ror on the driver's side automatically go into
anti-dazzle mode if light from a headlamp hits
the sensor on the inside rear-view mirror.
Advertisement
Table of Contents
