Table of Contents
Advertisement
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet ring spanner out of the tyre-
#
change tool kit and place it on the hexagon
nut of the jack so that the lettering "AUF" is
visible.
Position jack
2
at jack support point 1.
#
Turn ratchet ring spanner
3
#
jack
2
sits completely on jack support point
1
and the base of the jack lies evenly on
the ground.
Continue to turn ratchet ring spanner
#
until the tyre is raised a maximum of 3 cm
off the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirement:
The vehicle is raised (
R
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
clockwise until
3
page 405).
→
Wheels and tyres 405
page 403).
→
Advertisement
Table of Contents
