Table of Contents
Advertisement
404 Wheels and tyres
the jack must be placed on a firm, flat and
R
non-slip surface. If necessary, use a large,
load-bearing, non-slip underlay.
the foot of the jack must be positioned verti‐
R
cally under the jacking point.
Rules of conduct when the vehicle is raised:
Never place your hands or feet under the
R
vehicle.
Do not lie under the vehicle.
R
Do not start the engine and do not release
R
the electric parking brake.
Do not open or close any doors or the boot
R
lid.
Using the wheel wrench, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the bolts
completely.
Position of jack support points
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned ver‐
tically under the jacking point of the
vehicle.
Advertisement
Table of Contents
