Table of Contents
Advertisement
100 Seats and stowing
To switch off/reduce the level: press but‐
#
ton
1
repeatedly until the desired heating
level is set.
If all indicator lamps are off, the seat heater
is switched off.
%
The seat heater automatically switches down
from the three heating levels after 8, 10 and
20 minutes until the seat heater is switched
off.
%
If you switch the power supply off and on
again within 20 minutes, the previous setting
of the seat heater for the driver's seat
remains active.
%
You can set the distribution of the heated
sections of the seat cushions and seat
backrests on the front and rear seats using
the multimedia system (
→
%
Vehicles with the Warmth Comfort Package:
you can adjust the heating of the armrests in
the door and centre console using the multi‐
media system (
page 100)
→
Setting the panel heating
Multimedia system:
Vehicle
,
tings
.
When the seat heater is switched on, the armr‐
ests in the vehicle and the centre console can be
heated.
Select
#
or Off.
Switching the seat ventilation on/off
Requirements:
The power supply is switched on.
R
page 100).
î Vehicle set-
.
Panel heating
Front and
rear,
Front
only,
Rear only
To switch on/increase the level: press but‐
#
ton
1
repeatedly until the desired ventila‐
tion level is set.
Depending on the ventilation level, up to
three indicator lamps light up.
Advertisement
Table of Contents
