Table of Contents
Advertisement
Operating the combination switch for the
lights
1
Main beam
2
Turn signal light, right
3
Headlamp flasher
4
Turn signal light, left
Use the combination switch to activate the
#
desired function.
Main beam
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the main beam is activated, the indica‐
tor lamp for dipped beam L is deactiva‐
ted and replaced by the indicator lamp for
the main beam K.
To switch off: move the combination switch
#
back to its starting position.
Headlamp flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal lights
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow
2
or 4.
The corresponding turn signal light flashes
three times.
Light and sight 119
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow
2
Vehicles with Active Lane Change Assist:
Active Lane Change Assist can:
lengthen turn signal operation for the
R
duration of the lane change if the driver
has activated the turn signal indicator.
automatically activate the turn signal indi‐
R
cator if the driver indicated to turn in that
direction immediately before but a lane
change was not immediately possible.
or 4.
Advertisement
Table of Contents
