Table of Contents
Advertisement
passenger seat. The child restraint system
must not touch the roof or be put under
strain by the head restraints.
If necessary, adjust the angle of the seat
R
backrest and the head restraint position
accordingly.
Adjust the seat cushion inclination so that
R
the front edge of the seat cushion is in the
highest position and the rear edge of the
seat cushion is in the lowest position.
Always make sure that the shoulder belt
R
strap is correctly routed from the seat belt
outlet of the vehicle to the shoulder belt
guide on the child restraint system. The
shoulder belt strap must be routed forwards
and downwards from the seat belt outlet.
If necessary, adjust the seat belt outlet and
R
the front passenger seat accordingly.
Never place objects under or behind the
R
child restraint system, e.g. cushions.
Always comply with the manufacturer's installa‐
tion and operating instructions for the child
restraint system used, and the notes on attach‐
ing suitable child restraint systems
(
page 55).
→
Suitability of the seats for child restraint sys‐
tems
Notes on attaching suitable child restraint
systems
Only child restraint systems with the ECE stand‐
ard ECE R44 are permitted for use in the vehicle.
Example of an approval label on child restraint
systems:
Occupant safety
Label for child restraint systems in accord‐
ance with ECE R44
ISOFIX child restraint systems of the following
"Universal" category can be used, in accordance
with the tables on suitability of seats for the
attachment of child restraint systems, on seats
labelled U, UF or IUF.
55
Advertisement
Table of Contents
