Table of Contents
Advertisement
156 Driving and parking
Requirements:
The vehicle is parked outside of the garage.
R
The engine is switched off.
R
Press and hold button 1,
2
#
wish to program.
Indicator lamp
4
flashes yellow.
%
It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
Release the previously pressed button.
#
Indicator lamp
Point remote control
#
1 cm to 8 cm towards buttons 1,
Press and hold button
#
5
until:
Indicator lamp
R
uously. Programming is complete.
Indicator lamp
R
gramming was successful. Additionally,
synchronisation of the rolling code with
the door system must also be carried out.
If indicator lamp
#
green: repeat the procedure.
Release all of the buttons.
#
%
The remote control for the door drive is not
included in the scope of delivery of the
garage door opener.
or
3
that you
Synchronising the rolling code
Requirements:
The door system uses a rolling code.
R
4
continues to flash yellow.
5
at a distance of
2
or 3.
6
of remote control
4
lights up green contin‐
4
flashes green. Pro‐
4
does not light up or flash
The vehicle must be within range of the
R
garage door or door drive.
The vehicle as well as persons and objects,
R
are located outside the range of movement
of the door.
Advertisement
Table of Contents
