System Settings; Setting Up An Area; Creating An Area - Daikin DCM601A51 User Manual

6. System Settings

6-1 Setting up an Area

The following describes how to create, delete, and move an area, as well as register a management
point to an area. It also includes descriptions on how to name and set up the detailed settings and
icon, as well as how to sequentially start/stop areas in association with the above.
The procedures are as follows.

Creating an area

1. Touch the Area button on the System Settings tab of the Menu List screen and display the Area
Setup screen (see "4-5 Menu List screen: System Settings Tab").
Fig. 1
Top
All
Indoor
Ventilator
Building A
1F North
1F South
2. (1) on the Area Setup screen is the list of areas displayed as a tree structure organized in
descending order (Fig. 1). Select the higher level area (for example, 1F North) into which to
create the new one.
Top>Building A>1F North).
3. Touch the Create button (3). Enter the name of the new area (for example, Lavatory) in the
Name Input dialog that appears and touch the OK button.
119
Area
Management point
Aisle
Lighting A
Meeting Room
Room A
Room B
Office
(2) indicates the position of the currently displayed area (for example,
User's Manual EM11A015B
intelligent Touch Manager
(2)
(1)
(3)