Daikin DCM601A51 User Manual page 325

<Adding "Instructed by" information>
"Instructed by" information in Setup history (Setup Source)
This information indicates whether the Setup was performed via the iTM unit or Web (Setup
Source). When the Setup Source is "Web", the User Name is also added.
The table below describes the Setup Source.
Setup Source
iTM
"Instructed by" information in Status history (Status Source)
This information indicates which function's instruction caused the status change (Status Source).
When the Status Source is "Web", the User Name is also added.
When the Status Source is other than control equipment other than "iTM", the "Instructed by"
information is not added.
The table below describes the Status Source.
Status Source
Unit
Web
Schedule
Interlocking Control
Pre-Cool, Pre-Heat
Emergency Stop
Automatic Change Over
Heat Opt Stop
Timer Extension Settings
Temp Limit
Sliding Temperature
Setpoint Restriction
Setback
Leakage Check
Text string added to history (USER represents the User
Name.)
English
Unit iTM
Web Web: USER
Status Source Text string added to history
(USER represents the User Name.)
English
iTM
Web: USER
Schedule
Interlocking Control
Optimum Start
Emergency Stop
Automatic Change Over
Heat Opt Stop
Timer Extension Settings
Temp Limit
Sliding Temperature Settings
Setpoint Range
Setback
Leakage Check
User's Manual EM11A015B
intelligent Touch Manager
324