Daikin DCM601A51 User Manual page 221

NOTE
• While the iTM unit stores data on a USB memory, the Web Remote Management function
stores data on a PC's hard disk drive.
• With the Web Remote Management function, it is possible to store data for the following
functions on a PC's hard disk drive:
Power Proportional Distribution (see "10-1 Power Proportional Distribution Function"), Energy
Navigator (see "11. Energy Navigator"), History (see "7-1 Checking and Outputting History"),
Setup Export (see "7-3 Outputting Function Settings").
• The Web Remote Management function stores data as a ZIP-compressed file on a PC's hard
disk drive.
• While the iTM unit can read data from a USB memory for iTM area settings etc., the Web
Remote Management function cannot read data from a PC.
• The Web Remote Management function does not support the screen lock function on a PC
(see "6-3 Setting up the Password") because the Login screen can restrict the users.
• The Web Remote Management function does not suppor t iTM-specific functions
(screensaver, hardware setup, touch panel calibration) to prevent incorrect setup of the iTM
unit hardware.
• The Web Remote Management function supports the opening/closing of the Operation
Window for the Standard View (List) screen displayed on the PC so that the screen can
display more items.
• If communication is disconnected while you log in, the Web Remote Management function
requires approximately 4 minutes to be ready for you to log in again from the PC.
• For the supported Flash Player versions, see "Peripheral Equipment Specifications
(CB14A005)".
• Set up this function so that Flash Player is not updated automatically.*
Procedure: Start Flash Player from the Control Panel menu.
On the Advanced tab of the Flash Player Settings Manager, select "Never check
for updates" and close the window.
* Disabling the update function may leave your PC vulnerable to security threats.
• How to check the Flash Player version.
Procedure: Start your Web browser and type the address of the Flash Player version check
site: http://www.adobe.com/software/flash/about/ The current version is displayed under
Version Information.
User's Manual EM11A015B
intelligent Touch Manager
220