Cautions When Using The Itm Integrator - Daikin DCM601A51 User Manual

Cautions when using the iTM integrator

Operation and setup of the iTM integrator unit, and remote operation and setup by accessing to an
iTM from the iTM integrator are basically equivalent to the operation and setup performed in the
iTM unit. For details, see their respective pages.
The following describes functions specific to the iTM integrator and cautions when using it.
iTM integrator and iTM Version
To control iTM using iTM integrator, the iTM integrator must be installed with a software version
compatible with the software of the iTMs to control.
If the software is not compatible, iTM issues a communication error with a record of the cause in
the history. Consult a service person.
Access to iTM
Simultaneous access to an iTM unit via iTM integrator is allowed to 5 users.
However, multiple users cannot simultaneously open the same setup screen.
History function
The history displayed from the Operation Mgmt. tab of the iTM integrator Menu List screen is the
history of the iTM integrator unit (can save up to 10,000 records).
To check the history of each iTM, access the target iTM from the iTM integrator Standard view
screen and display history from the iTM's Menu List screen.
To output iTM integrator history data, output it to a USB memory connected to the iTM integrator.
Locale
The iTM integrator's System Settings allows you to set up the language to use, date and time
format, decimal point and delimiter, and icon color. These settings also apply when displaying the
screen of an iTM accessed from the iTM integrator.
However, these settings are iTM integrator's settings and not of the accessed iTM. The locale of the
accessed iTM unit remain as respectively set up and will not change as a result of an operation
from the iTM integrator.
The unit of temperature follows the locale of the accessed iTM unit (the view on the iTM integrator
cannot be changed either).
User's Manual EM11A015B 284
intelligent Touch Manager