Daikin DCM601A51 User Manual page 288

Disconnection of communication with iTM
The iTM integrator accesses the iTM via a network. Therefore, communication with iTM may be
disconnected. Furthermore, communication may be disconnected due to power interruption in the
iTM unit, or initialization due to settings change.
If communication is disconnected when a screen of the accessed iTM is open on the iTM integrator,
the messages described in the following table are displayed.
Reason
iTM restart causing settings change
iTM power interruption
Communication down due to network
causes
Area deletion
Area member registration
Area attributes change
Area move
Area CSV input
Management point setup
iTM unit's locale change
Centralized Monitoring Setup change
Confirm Setup change
Changeover Option change
Web user
Web Remote Management from the iTM integrator is permitted to managers only, and the
maximum number of managers you can register is 4.
287
Timing
When iTM is shut down
When iTM power goes down
When communication goes down
When the "Yes" button is pressed on the
deletion confirmation dialog
When the "OK" button is pressed on the
Registration screen
When the "OK" button is pressed on the
Area Attribute Setup screen
When the "OK" button is pressed on the
Area Move screen
When the "Yes" button on the confirmation
dialog is pressed and saving is successful
When the "OK" button is pressed on the
Mgmt. Points Attributes Setup screen
When the "OK" button is pressed on the
Locale screen
When the "OK" button is pressed on the
Centralized Monitoring Setup screen
When the "OK" button is pressed on the
Confirm Setup screen
When a Changeover Option is changed
User's Manual EM11A015B
intelligent Touch Manager
Message
<Controller name>
Communication disconnected.
Wait a moment to access
again.
<Controller name>
System settings changed.
Please access again.