Daikin DCM601A51 User Manual page 240

Sets up details for the selected energy type.
In the combo box (10), select the energy type from Power, Gas and Water.
(11)
Select the unit
combo box. The unit is fixed for each Energy Type: it is kWh for power, and m
Conversion factor in (12).
Set the CO
2
Touch the Modify button and enter the conversion factor in the Numerical Input dialog that
appears. You can enter a value in the 0 to 9999.999 range, in increments of 0.001. The unit is
displayed in accordance with the energy type selected in (10).
If a new energy conversion type is registered on the Energy Conversion Type Setup screen,
enter the new conversion factor in the Other Conversion factor field (13).
Touch the Modify button and enter the conversion factor in the Numerical Input dialog that
appears. You can enter a value in the 0 to 9999.999 range, in increments of 0.001. The unit is
displayed in accordance with the unit selected in (10).
Touch the OK button to save the settings and return to the Energy Type screen.
When finished, touch the Close button to return to the Display Mode screen.
NOTE
For information on registering new conversion types, consult your authorized dealer.
239
(10)
(11)
(12)
(13)
from the candidate corresponding to the selected Energy Type
User's Manual EM11A015B
intelligent Touch Manager
(10)
in the
3
for gas and water.