Daikin DCM601A51 User Manual page 175

• Interlock Program Input Setup Screen
This screen is displayed when you touch the Modify button on the Interlock Program Setup
screen.
Sets up the inputs to the interlocking program.
(2)
(1) Management Point Input list
Displays a list of management points monitored as inputs to the interlocking program.
(2) Timer (min.) button
Displays the Numerical Input dialog that allows you to set the required duration.
The range of values you can enter is 0 to 30 seconds, in increments of 1 second.
(It is 1 to 30 seconds when the Detection Condition is Analog value.)
(3) Condition Setup button
Displays the Condition Setup screen that allows you to set up the conditions required for the
management point selected in the Management Point Input list.
(4) Available Management Points list
Displays a list of management points that can be selected as input for the condition to detect
selected in the Detection Condition combo box.
(5) Detection Condition combo box
Selects the condition to detect at an available management point in the Available Management
Points list.
Select a condition to detect from Switch, Equipment error, Analog upper limit error, Analog lower
limit error, Operation mode, and Analog value.
(6)
(1)
(7)
(3)
User's Manual EM11A015B
intelligent Touch Manager
(4)
(5)
(8) (9)
174