iTM unit settings change
iTM unit screen switching, or restart, etc. may occur as a result of iTM settings change from the iTM
integrator. See the following table.
Setting contents
iTM restart causing settings change
Area deletion
Area member registration
Area attributes change
Area move
Management point setup
Centralized Monitoring Setup change
Confirm Setup change
Changeover Option change
Timing
When restart starts
When the "Yes" button is pressed on
the deletion confirmation dialog
When the "OK" button is pressed on
the Registration screen
When the "OK" button is pressed on
the Area Attribute Setup screen
When the "OK" button is pressed on
the Area Move screen
When the "OK" button is pressed on
the Mgmt. Points Attributes Setup
screen
When the "OK" button is pressed on
the Centralized Monitoring Setup
screen
When the "OK" button is pressed on
the Confirm Setup screen
When the "OK" button is pressed on
the Changeover Option screen
User's Manual EM11A015B
intelligent Touch Manager
Result
The iTM unit restarts
Displays the top screen of the
Standard Icon view of the iTM
screen.
If a setup screen is open, the
settings in progress are
canceled.
286