2. Touch the Common tab
Select the Filter Sign Reset check box
the screen.
NOTE
Not selectable when there are no filter signs.
13-2
Maintaining the LCD display
When the surface of the LCD of the iTM or the iTM unit is dirty, wipe the dirt off with a piece of soft
cloth soaked in a diluted neutral detergent and wrung sufficiently.
CAUTION
• Do not use strongly acid detergent and organic solvents such as alcohol, paint thinner, or
benzine. The print may fade, or wear out and discolor.
• Forcibly rubbing with hard cloth may damage the LCD display. Always use soft cloth to
remove dirt.
• Leaving the LCD display with water droplets and/or dirt may stain the LCD or peel off the
coating.
289
(3)
of the Detailed Setup screen and display the Common screen.
(4)
to enable the reset. Touch the OK button and close
User's Manual EM11A015B
intelligent Touch Manager