(3)
Mo
Select and set a MultiState value for Mo.
The MultiState value set on the screen is set up during the trial.
NOTE
You cannot set MultiState in the area.
• HW Supply Tab
Sets up the Hydrobox
Change settings by selecting the relevant check boxes.
(1)
On/Off (Reheat)
Sets up whether starting/stopping.
Start : Reheat start
Stop : Reheat stop
(2)
Low Noise
Enables or disables the Low Noise function.
(3)
Storage Water Setpoint
Sets up the Storage Water temperature.
51
(1)
(2)
User's Manual EM11A015B
intelligent Touch Manager
(3)