Select one month at a time and enter the actual value for each month in the Numerical Input
dialog that appears when you touch the Modify button (38).
The actual values which measured by Pi management points cannot be modified.
You can enter a value in the 0 to 2000000 range, in increments of 0.1.
The CO
conversion factor for the energy consumption appears in (39). The unit displayed
2
depends on the selected energy type. Touch the Modify button and enter the conversion factor in
the Numerical Input dialog that appears.
You can enter a value in the 0 to 9999.999 range, in increments of 0.001.
If a new energy conversion type is registered on the Energy Conversion Type screen, the Other
Conversion factor
(40)
field is displayed. The displayed unit will depend on the energy type ([Unit
registered in the new conversion type]/kWh). Enter the conversion factor if necessary.
You can enter a value in the 0 to 9999.999 range, in increments of 0.001.
When finished, touch the OK button to save the settings and return to the Bud/Act set screen.
User's Manual EM11A015B
246
intelligent Touch Manager