The Port Edit Screen - ZyXEL Communications GS1900 Series User Manual

Fig ure 114
The following table describes the labels in this screen.
Table 62 Configuration > Port > Port
L ABEL
Port
Port
Port Name
State
Link Status
Speed
Duplex
FlowCtrl State
Edit
Cancel
19.2.2 T he Po rt Edit Sc re e n
Use this screen to configure Switch port settings. Click
screen.
Chapter 19 Configuration: Port
Configuration > Port > Port
DESC RIPT IO N
Displays the port index number.
Displays a descriptive name that identifies this port. The length of the name can be up to 32
alpha-numerical characters.
Note: Due to space limitations, the port name may be truncated in some Web Configurator
screens.
Displays the port status as enabled or disabled.
Displays the link status as up or down.
Displays the speed of the Ethernet connection on this port. The choices are
and .
1000M
Displays the duplex mode of the Ethernet connection on this port. The choices are
.
ha lf
Displays the flow control state as enabled or disabled. A concentration of traffic on a port
decreases port bandwidth and overflows buffer memory causing packet discards and frame
losses. Flow Control is used to regulate transmission of signals to match the bandwidth of the
receiving port.
Select this check box to configure the properties of a port. Click the
properties of the port.
Click to discard the changes.
C a nc e l
GS1900 Series User's Guide
C o nfig ura tio n
116
,
Auto 10M
a uto
button change the
Edit
> > > to open this
Po rt Po rt Edit
, ,
100M
, , or
full