Igmp Filtering Profile - ZyXEL Communications MES3500-24S User Manual

Table 86 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Snooping VLAN
LABEL
VLAN
Name
VID
Add
Cancel
Clear
Index
Name
VID
Delete
Cancel

25.3.3 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch are
able to join. A profile contains a range of multicast IP addresses which you want clients to be able to
join. Profiles are assigned to ports (in the IGMP Snooping screen). Clients connected to those ports are
then able to join the multicast groups specified in the profile. Each port can be assigned a single profile.
A profile can be assigned to multiple ports.
Click Advanced Application > Multicast > IPv4 Multicast in the navigation panel. Click the IGMP
Snooping link and then the IGMP Filtering Profile link to display the screen as shown.
Figure 118 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering Profile
Chapter 25 Multicast
DESCRIPTION
Use this section of the screen to add VLANs upon which the Switch is to perform IGMP
snooping.
Enter the descriptive name of the VLAN for identification purposes.
Enter the ID of a static VLAN; the valid range is between 1 and 4094.
Note: You cannot configure the same VLAN ID as in the MVR screen.
Click Add to insert the entry in the summary table below and save your changes to the
Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so
use the Save link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click this to clear the fields.
This is the number of the IGMP snooping VLAN entry in the table.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Check the rule(s) that you want to remove in the Delete column, then click the Delete button.
Click Cancel to clear the Delete check boxes.
MES3500-24S/MGS3520 Series User's Guide
206